1. MCB Description:
• High breaking capacity and current limiting characteristics;
• Can be installed on standard busbars;
• Dual-function terminals on the upper and lower sides (lift type/open type);
• It can be fixed to the busbar on the upper or lower side;
• With isolation function, it can be used as a main switch;
• Red-green color contact status indicator;
• Wiring terminal guide to prevent wrong wiring;
• 3-position guide rail clip for easy removal from the busbar;
• Complete product specifications;
• Applicable up to 48 V DC
• Rated breaking capacity 6kA in accordance with IEC/EN 60898-1
2. Electrical technical data:
3.Mechanical technical data:
• High breaking capacity and current limiting characteristics;
• Can be installed on standard busbars;
• Dual-function terminals on the upper and lower sides (lift type/open type);
• It can be fixed to the busbar on the upper or lower side;
• With isolation function, it can be used as a main switch;
• Red-green color contact status indicator;
• Wiring terminal guide to prevent wrong wiring;
• 3-position guide rail clip for easy removal from the busbar;
• Complete product specifications;
• Applicable up to 48 V DC
• Rated breaking capacity 6kA in accordance with IEC/EN 60898-1
2. Electrical technical data:
| Design according to | IEC/EN 60898-1 |
| Characteristic | B, C, D |
| Rated voltage | AC 230 / 400V |
| DC 48V Single-pole, 2 pole in series: 96VDC | |
| Rated frequency | 50/60Hz |
| Rated current | 6,10,16,20,25,32,40,50,63A |
| Rated current interrupting rating | B,C,D curve----6000A |
| Number of poles | 1,2, 3, 4 |
| Endurance | ≥ 20,000 operations |
| Power inlet mode | Upcoming |
| Allowable ambient temperature range | -40ºC~75ºC |
3.Mechanical technical data:
| Per pole width dimension | 18mm |
| Installation method | IEC standard rail 35mm |
| Enclosure protection grade | IP20 |
| Dual function terminals on both sides | Open type / lift type |
| Terminal protection | Finger and hand safe |
| Terminal wiring capacity | 1-25 mm² |
| Terminal screw tightening torque | 2-2.5 Nm |
| Busbar thickness | 0.8-2 mm |
| Installation angle | function is independent of position |